Prima Power tooling replacement

What is the Prima Power tooling system?

Prima Power supplies tooling under the European tang, servo-electric specific on eP series. If your machine is already equipped with this system, replacement tools are specified to match it — the tang geometry, the working height and the retention method all have to agree, not just the nominal size.

How are Prima Power catalogue numbers structured?

Prima Power servo-electric machines have their own tooling requirements, and the eP series is specified around the machine's stroke and clamping. Machines badged Finn-Power predate the Prima Power name and remain widely installed.

• A catalogue number identifies the profile; it does not replace measuring the tool.
• Worn or reground tools keep their number but lose working height.
• Where a brand publishes an official decoding key, that key is authoritative — not third-party guesses at what the digits mean.

What should I send to identify a replacement?

If your catalogue number is not listed, send us the number together with a photograph of the tool and a ruler shot of the tang. We will confirm the system, angle, radius, height and segment length before you order.

1. The catalogue number stamped or laser marked on the tool.
2. The angle and tip radius, if legible.
3. The working height from shoulder to tip.
4. The total length and any segment combination.
5. A photograph of the tool and of the tang with a ruler in shot.

Related technical pages