Are these real orders?

Yes. Every drawing in this library comes from a production order that has been made and shipped. Customer names and commercial terms are not shown.

What steel and hardness do these orders use?

42CrMo4 is the recurring material, heat-treated to HRC 47±2° for punch and die bodies, with turnover plates and wear parts drawn to their own hardness.

What tolerance class should I expect?

±0.01 mm on the dimensions that govern fit — tang width, shoulder heights and V angles — and ±0.02 mm on general lengths, as shown on the drawings above.

Can you work from my own drawing?

Yes. A dimensioned PDF is the preferred input. If your drawing is incomplete, send what you have and the missing dimensions will be confirmed with you before production.

Do you make segmented sets like the ones shown?

Yes. The library shows sets segmented in 10–100 mm widths and 415 / 835 mm lengths; other combinations are made to order.

Press Brake Tooling Drawings from Real Orders

What are these drawings?

Every drawing on this page is a production order that has been made and shipped. Each one carries the dimensions the tool was machined to, the steel grade, the heat treatment and the tolerance class, exactly as the order was released to the shop floor.

Drawings are reproduced as issued, including dimension lines and tolerance blocks.
Customer names and commercial terms are not shown; the geometry is the point.
Use them to check what a complete specification looks like before you send yours.

What specifications do these orders share?

Across the orders in this library the same core specification recurs, because it is what the tooling is actually machined and heat-treated to.

Recurring specification across the order library
Item	Specification as drawn
Material	42CrMo4
Standard hardness	HRC 47±2°
Linear tolerance	±0.01 mm
Coarse tolerance	±0.02 mm
Segment widths	10–100 mm
Standard lengths	415 / 835 mm

Individual orders vary: acute tips, large radii and heavy-section work are drawn to their own tolerances. Where your application is unusual, say so on the enquiry and the drawing will be checked against it.

Trumpf / Wila style tooling

Mr. Rob Order drawing — Trumpf-style safety-tang punch and die set: 500 mm segments in 10–100 mm widths, 42CrMo4 at HRC 47±2, full-body heat treatment and oxidised finish. Trumpf / Wila compatible tooling

Trumpf tool OW210K(2) drawing — Trumpf-style safety-pin punch: 20 mm tang with retention groove, R0.5 tip at 85.5°, 157 and 177 mm shoulder heights. Trumpf / Wila compatible tooling

Trumpf tools 20250529-1 drawing — Trumpf/Wila-style punch with two dies: 20 mm tang, 80° V, R3 and R8 tips, 120–200 mm working heights. Press brake dies

Trumpf R10 Die H350 drawing — Trumpf-style R10 die, 350 mm height, 80° V, supplied in 25 / 50 / 100 mm segments. Radius dies

Trumpf gooseneck H200 R8 251030(3) drawing — Trumpf-style gooseneck punch: 200 mm height, R8 tip at 82°, 20 mm tang. Gooseneck punches

Rolla V die V25 drawing — Rolla-V type V25 die for European-style tooling: 42CrMo body at HRC 47±2, turnover plate at 55±3, 510 mm total length. Rolla-V type dies

Amada style tooling

Amada Single V 40 drawing — Amada-style single-V V40 die: 86° included angle, R4 shoulders, 60 mm die body. Amada compatible tooling

Amada flat punch and V63 20260122(1) drawing — Amada-style flat punch and V63 die: 835 mm segments, 3340 mm and 3320 mm total lengths. Amada compatible tooling

Amada die holder system drawing — Amada-style die holder components: 15 mm tang, 50 / 60 / 80 mm bodies, ±0.01 mm tolerances throughout. Tool holders

6mm Al sheet punch and die set Accurl type drawing — Punch and V85 die set for 6 mm aluminium: 82° tip with R3, 4175 mm total length in 835 mm segments, 42CrMo4 at HRC 47±2°. Press brake punches

American style tooling

America type gooseneck 50387 drawing — American-style gooseneck punch: R25 profile, 12.7 mm tang, 508 mm segments, 42CrMo4 at HRC 47±2°. American style tooling

Rise die holder drawing — American-style die holder: 12.7 mm (0.500 in) shank, 76.2 mm (3.000 in) body, 1371.6 mm (54 in) length. Tool holders

European and other machine systems

Accurl tools 20260109(2) drawing — Accurl-compatible gooseneck punch (R90) with a 4V die: 3340 mm total length, 835 mm segments in 10–200 mm widths. Accurl replacement tooling

European type drawing — European-style multi-V die: 82° angles with R4 / R1 / R0.25 shoulders, 60 mm body. European style tooling

Bystronic Acute punch R6 drawing — Bystronic-style acute punch: 30° included tip angle, R6, 250 mm working height. Acute punches

Special profiles and heavy-duty work

Jeff Big gooseneck 240104 drawing — Large gooseneck punch: 300 mm reach, 88° tip, 13 mm tang dimensioned 13−0.02. Gooseneck punches

H67 4V DIES drawing — H67 4V die: R40 and R67 profiles, 85° tip, 97 mm body height. Press brake dies

140mm 4 way V drawing — 140 mm 4-way V die: 86° V angle, 3700 mm total length in one piece. Press brake dies

Inserting die for 500T4000 drawing — Adjustable-opening die for a 500 T press: 40–240 mm opening range, 4000 mm overall length. Rolla-V type dies

20250522 模具订单 drawing — Punch set with 30°, 60° and 86° tips: 150 mm height, 13 mm tang, ±0.01 mm tolerances. Press brake punches

1600T2500 Heavy duty tool R400 drawing — Heavy-duty R400 punch and die for a 1600 T / 2500 mm press: 700 mm and 400 mm shoulder widths, 2500 mm length. Custom tooling

R0.394 R10 punch drawing — R0.394 punch with a full 18-step process sheet — raw material, planning, grinding, heat treatment, milling, CNC, precision grinding, laser marking, delivery — at HRC 50±2°. Custom tooling

Can a tool be made from a drawing like these?

Yes — a dimensioned drawing is the preferred way to order special tooling. If a profile on your machine matches one of the drawings above, reference it and the interface will be confirmed from the same dimensions.

Send the drawing as PDF, with the tang or shank dimension shown.
State the material, thickness range and bend radius you work with.
State the quantity and whether segmented lengths are acceptable.
If you have no drawing, the four measurements on the identification page plus a clamp photograph are enough to start.

How do I know the drawing will be followed?

The same drawing is used for machining, heat treatment, inspection and the outgoing report, so the dimensions you approve are the dimensions that are checked before packing.

Drawing issued and confirmed with you before production.
Material and heat treatment recorded against the order.
Dimensional inspection against the drawing before packing.
Outgoing photographs or video available on request.

Next step

Send your drawing or the four measurements and get tooling quoted against them.

Request a quotation

Press brake tooling drawings from real orders

What are these drawings?

What specifications do these orders share?

Trumpf / Wila style tooling

Amada style tooling

American style tooling

European and other machine systems

Special profiles and heavy-duty work

Can a tool be made from a drawing like these?

How do I know the drawing will be followed?

Related technical pages

Custom tooling

Tooling drawing guide

Identify your tooling system

Catalogue number index

Next step

Send an enquiry